Sewell BlastIR SW-29311 Infrared (IR) Remote Control Receiver Kit (Black)

You looking to find the "Sewell BlastIR SW-29311 Infrared (IR) Remote Control Receiver Kit (Black)" Good news! You can purchase Sewell BlastIR SW-29311 Infrared (IR) Remote Control Receiver Kit (Black) with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $43.95 $38.95   

Product Feature

• Forward infrared signals to operate electronic components behind closed doors
• IR Receiver has size of 2.25in (L) x 0.5in (W) x 0.5in (H); 9ft cable is attached for connection to IR Repeater
• Emitters have a dual emitter y-cable; overall length is 9 feet; final 3 feet may be separated. 38kHz & 56kHz transmit frequency.
• Simple to use; Controls 4 devices (expandable to a maximum of 12)
• Kit includes: IR Distribution Block; Mini IR Receiver; (2) Dual IR Emitters; AC/DC Adapter

Product Description

The BlastIR is designed to get your remote control's signal to where it needs to go. Since remote control signals (IR) need "line-of-sight" to work, you will need this extender if the equipment you're trying to control is not in sight. You'll need to extend your IR signals, especially if your TV is wall-mounted.Sewell's IR extender kits provide all the parts you need in one convenient package to send an IR signal from the comfort of your couch to wherever you store your equipment. How This Works:This kit includes an IR receiver, a connecting block (which also serves as a signal repeater), and IR emitters. The IR receiver is a small inconspicuous device that you can mount on your HDTV's bezel or anywhere else in the room where you will want to point your remote. It is small and very easy to hide, but must be in line-of-site to your couch (or wherever you will be sitting when using your remote control). This receiver receives your remote control's commands and sends the signal over 3.5mm mini stereo wire to the connecting block (which you can hide behind your wall). The connecting block then actively repeats and sends the same signal through all IR emitters connected to the block. Four emitters come with the kit and each emitter features two "eyes". Each eye blasts out the same IR signal, and you can tape them directly to your equipment or simply fix them to a nearby shelf or wall (or even the back of the door of your video closet).

Sewell BlastIR SW-29311 Infrared (IR) Remote Control Receiver Kit (Black) Review

I wanted a wired IR extender instead of an RF (wireless) style to control my TV/cable and stereo equipment. This product is exactly what I hoped. It comes with one eye to receive the remote control signal and a dual emitter for the equipment rack (which I located in a closet). The amplifier unit has up to six emitter outputs to feed the equipment rack. The amplifier also has an input if you want to add an in-wall receiver (sold separately). The recevier cable and emitter cables use standard 1/8" stereo plugs and the cables are about 6 feet. I added a separate 25 foot cable to extend the recevier eye and it works fine. The receveir eye and amplifer both have an LED that illuminates whne the remote control is pressed to show it processes the signal. Finally, this same product is available from many suppliers, this supplier was notably less expensive.

Most of the consumer Reviews tell that the "Sewell BlastIR SW-29311 Infrared (IR) Remote Control Receiver Kit (Black)" are high quality item. You can read each testimony from consumers to find out cons and pros from Sewell BlastIR SW-29311 Infrared (IR) Remote Control Receiver Kit (Black) ...