VideoSecu Adjustable Tilting Ceiling mount for most 32"-60" LCD LED Plasma TV Flat Panel Display Fits Flat or Vaulted Ceiling, also to the wall extending 26-55" MPC53BE 1UO
You looking to find the "VideoSecu Adjustable Tilting Ceiling mount for most 32"-60" LCD LED Plasma TV Flat Panel Display Fits Flat or Vaulted Ceiling, also to the wall extending 26-55" MPC53BE 1UO" Good news! You can purchase VideoSecu Adjustable Tilting Ceiling mount for most 32"-60" LCD LED Plasma TV Flat Panel Display Fits Flat or Vaulted Ceiling, also to the wall extending 26-55" MPC53BE 1UO with secure price and compare to view update price on this product. And deals on this product is available only for limited time.Price:
Product Feature
- Universal Design Ceiling mount fits most 32" 37" 40" 42" 46" 47" 50" 52" 55" 58" 60" Display, please check TV VESA and Weight.
- Fits VESA 200x200 mm to VESA 680x460 mm mounting holes; Fits flat ceiling, vaulted ceiling, as well as the wall.
- Easy height adjustment, extends from 26" up to 55". Loading capacity 110 lbs.
- Tilt 15 degree up or down. Pan 360 degree. Cable through ceiling pole.
- Package including: One TV ceiling mount, one 50cm extension pole, One standard hardware pack.
Product Description
The VideoSecu ceiling mount is compatible with most 32-60 inch LCD LED and Plasma TVs. Heavy gauge steel construction provides loading capacity up to 110lbs. Supports all VESA mounting standards up to 600x400 (200x100, 200x200, 400x200, 300x300, 400x400, 600x200 & 600x400) and many odd size mounting patterns (mounting holes on the rear of the TV or panel should be no more than 26.8" apart horizontally and up to 18.1" vertically). This mount offers 360 degree pan, up and down tilt to reduce glare and provides comfortable viewing angles. The height adjustment can be made in 4 inch increments from 26 to 55 inches (660mm to 1400mm). VideoSecu brand ceiling mount, please report to Amazon if you receive a mount without VideoSecu logo.VideoSecu Adjustable Tilting Ceiling mount for most 32"-60" LCD LED Plasma TV Flat Panel Display Fits Flat or Vaulted Ceiling, also to the wall extending 26-55" MPC53BE 1UO Review
I used this to mount my 56" LCD TV from a ceiling since the wall behind it was stone fireplace. Before ordering I was rather apprehensive about hanging it from the ceiling, and the material quality this mount may have. After unboxing this I was put slightly more at ease. It is indeed very thick, very strong steel that dominated the real cheap Chinese/ebay wall mounts I've used in the past.The steel tubing hanging from the ceiling has an optional extension pole to give you plenty of reach from tall ceilings, with several hole slots spaced every few inches apart to give you the height adjustment. The steel tubing is hollow giving you a good place to run cords from the TV to ceiling to give it a nice clean tucked in look. It can be a bit of a pain to run any cables with large connectors, or too many cables through it, especially after the TV has been hung. You have to take the bolts out holding the two pieces of tubing together to fit the cables through if the connector is too large to push around, not really a big deal you just have to have someone present to support the TV while you do that. I managed to squeeze two HDMI cables, a power cable, a speaker cable, and an ethernet cable through the center shaft - which was a huge perk for me.
The bracket for the back of the TV mount is pretty exceptional and can probably be used as a wall mount by itself. It has tilt adjustment obviously and pretty decent locking bolts. I ended up using flat slotted steel (garage door hangers) that ran off the top and bottom of the backet, the top holds up a large center bar speaker, and the bottom holds up a kinect sensor.
The top mount part has a small foot-print, which I would highly debate if I were you trying to use it to mount solely in ceiling/drywall. Not a fault by design as much as just a few holes that close to each other in any drywall would be skeptical of the weight it could carry (depends on the size of your TV). I recommend either hitting a 2x4(6) joist or if you have to cut a small square out of the ceiling to put one between two joists, then suspend this from that.
I've had this installed for about 6months now worry free. It's a bit pricey, but I've had a few mounts half the price and the steel was half as thick. A little insurance premium for piece of mind, in my opinion. No real issues or things I'd necessarily change with it, all in all very satisfied.
Most of the consumer Reviews tell that the "VideoSecu Adjustable Tilting Ceiling mount for most 32"-60" LCD LED Plasma TV Flat Panel Display Fits Flat or Vaulted Ceiling, also to the wall extending 26-55" MPC53BE 1UO" are high quality item. You can read each testimony from consumers to find out cons and pros from VideoSecu Adjustable Tilting Ceiling mount for most 32"-60" LCD LED Plasma TV Flat Panel Display Fits Flat or Vaulted Ceiling, also to the wall extending 26-55" MPC53BE 1UO ...
No comments:
Post a Comment